what is the best donic rubber for stiga OC CR?
Printed From: Alex Table Tennis - MyTableTennis.NET
Category: Equipment
Forum Name: Equipment
Forum Description: Share your experience and discussions about table tennis equipments.
Moderator: haggisv
Assistant Moderators: position available
URL: http://mytabletennis.net/forum/forum_posts.asp?TID=45398
Printed Date: 04/28/2024 at 1:15am
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com
Topic: what is the best donic rubber for stiga OC CR?
Posted By: ninglei23
Subject: what is the best donic rubber for stiga OC CR?
Date Posted: 10/31/2011 at 8:14am
|
hey guys I would like to know what is the best rubber I could use on my forehand that will be great with the stiga OC CR.I play close and mid to the table and I want to add more power to my thirdball attacks because when I use chinese rubber I have to graze the ball to the topsheet so I can only produce spin not speed and power thanks.
------------- Yinhe V-14 FH:Xiom Vega Pro BH:Donic Baracuda |
Replies:
Posted By: speaquinox
Date Posted: 10/31/2011 at 8:35am
|
Baracuda or Acuda S1. Former is slower with more pronounced spin. ------------- Innerforce ALC, Glayzer / Rozena |
Posted By: cotdt
Date Posted: 10/31/2011 at 8:46am
|
Why Donic? Tenergy 05 would be the best. It has more spin and speed than Acuda S1.
------------- Nittaku Resound FH: Joola Timeless BH: Joola Timeless |
Posted By: ninglei23
Date Posted: 10/31/2011 at 8:52am
|
@cotdt I don't like to use rubbers that are way advance and very pricey it's not the rubber it is who is using it many players here in the phil are strong even though they don't use tenergy
------------- Yinhe V-14 FH:Xiom Vega Pro BH:Donic Baracuda |
Posted By: AcudaDave
Date Posted: 10/31/2011 at 9:21am
|
try Acuda S2 in 2.0mm or JO Platin. AcudaS3 is also very good. My son plays with Stiga Offensive CR and Acuda S3 on his FH and likes it very much. ------------- Joola Zhou Qihao 90 blade Joola Dynaryz Inferno max - BH Nittaku Moristo SP 2.0 - FH |
Posted By: TheRobot99
Date Posted: 10/31/2011 at 9:25am
 One thing that should help is to do a half brush half hitting motion and then you should get a loop-drive. Then increase the speed and spin until you can blast balls past people. ------------- Ross Leidy Custom, DHS Hurricane III Neos, Nittaku Nodias Xiom Fuga, Globe 999 National 39, Nittaku Nodias JOOLA Torre All+, DHS Hurricane II #19 Sponge, Galaxy Moon 38 PTTC VP - 2011-12 |
ninglei23 wrote:Posted By: ninglei23
Date Posted: 10/31/2011 at 9:57am
|
@TheRobot99 thanks a lot
------------- Yinhe V-14 FH:Xiom Vega Pro BH:Donic Baracuda |
Posted By: frogger
Date Posted: 10/31/2011 at 12:12pm
I must disagree, T05 is not faster than Acuda S1. I have played with both. Spin between the two is subjective. ------------- Wood Paddle Red side Black side. |
Posted By: ninglei23
Date Posted: 10/31/2011 at 7:25pm
|
that is right
------------- Yinhe V-14 FH:Xiom Vega Pro BH:Donic Baracuda |
Posted By: Vassily
Date Posted: 10/31/2011 at 7:33pm
|
Close to table Id rather use S1, power doesnt matter too much when you are swinging over the table, and S1 is lighter (makes a big difference IMO) with better feel. I think S1 topsheet is a bit softer, which makes it easier to lock the ball in. ------------- Nittaku Acoustic FL T05 Acuda S2 2.0mm |
Posted By: AcudaDave
Date Posted: 11/01/2011 at 10:17am
|
Ningle...there are several different rubbers that would be great for your fh, but there is no one perfect rubber for this. I've made a few suggestions, but asking what the best rubber would be is like asking what would be the best tires for my new sports car. There are plenty of good brands available. Some good players I know now use Stiga Calibra LT on their fh and like that. Stiga rubbers typically don't have quite as much spin as other rubbers, but they are pretty good. I really like Acuda S3, and I've read good reviews of Acuda S2. Tenergy is very costly and really not a good choice if you're not an advanced player that can get the most out of it.
If you're a beginner - intermediate player then find a good rubber that is not too fast, has good spin and control. Acuda S3 is very good for allround play as it has good spin/control/speed. The Tibhar Genius is not too bad, and I'm also hearing good things about Yasaka Rakza 7 rubbers. But to your point you asked what is the best Donic rubber and I would say Acuda S3 or S2. S2 will be a little faster so it won't have as much control.
------------- Joola Zhou Qihao 90 blade Joola Dynaryz Inferno max - BH Nittaku Moristo SP 2.0 - FH |
Posted By: Imago
Date Posted: 11/01/2011 at 10:20am
| Acuda S1, no doubt. |
Posted By: ninglei23
Date Posted: 11/01/2011 at 10:22am
|
I just said best donic rubber because I don't want to risk my money of buying an equipment that will not be good with my stiga OC CR that is an all wood blade
------------- Yinhe V-14 FH:Xiom Vega Pro BH:Donic Baracuda |
Posted By: icontek
Date Posted: 11/01/2011 at 10:33am
|
S3. Hands down. In the past, you've mentioned problems putting your third ball attacks on the table. This will help. ------------- http://bit.ly/vLMhuB" rel="nofollow - - RC1042 . OSP Virtuoso AC: PK50 + R42 |
Posted By: ninglei23
Date Posted: 11/01/2011 at 11:11am
|
ohh..come on I just can't get my 3rd ball attacks because my calibra don't have grip anymore I am using it for 5 hrs on weekends and 3 hrs on weekdays and I used it for 8 months but now I can do it with no problem pshh ------------- Yinhe V-14 FH:Xiom Vega Pro BH:Donic Baracuda |
Posted By: AcudaDave
Date Posted: 11/01/2011 at 12:58pm
|
gotcha...ok then definitely go with Acuda S3...you will like it. ------------- Joola Zhou Qihao 90 blade Joola Dynaryz Inferno max - BH Nittaku Moristo SP 2.0 - FH |
Posted By: Zach Moy
Date Posted: 11/01/2011 at 6:19pm
| The best rubber for Looping and blocking would be Tibhar Nimbus Sound tuned. but for donic i've used F1 desto and it is pretty good. baracuda wasn't that good with OC CR but was okay not great. |
Posted By: aerial
Date Posted: 03/26/2017 at 7:47pm
|
alright myTT, I got bit by the EJ bug and I just so happen to be using an OC CR... I am thinking about using a softer rubber on my forehand. currently using jp1turbo 2.0 on fh and jp3 1.8 on bh. I was pondering on changing my blade too to a carbon one but I got talked out of it and the EJ bug is still strong so I suppose comprising on just changing my fh rubber should suffice. I am thinking about jp2, evolution fx-p, or maybe the rasant series? I try to play a looping game but in reality in the game, I have a sucky swing on my forehand. I am hoping a change to softer rubber would help me in addition to trying to change my technique in general here I am doing some service and attack https://youtu.be/oDJKC6YohAs here I am playing versus short pips (red) and long pips(black) https://youtu.be/kmk6rQ7Q10A my current rating is around 1400, I don't play enough to improve drastically but I'm trying to change that these days :-) |
Posted By: Rich215
Date Posted: 03/27/2017 at 10:05am
|
aerial...your responding in a 6+ year old thread....so many rubbers since then. You should probably start a new thread. ------------- |