andro revolution QUAD
Printed From: Alex Table Tennis - MyTableTennis.NET
Category: Equipment
Forum Name: Equipment
Forum Description: Share your experience and discussions about table tennis equipments.
Moderator: haggisv
Assistant Moderators: position available
URL: http://mytabletennis.net/forum/forum_posts.asp?TID=6925
Printed Date: 04/27/2024 at 7:26am
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com
Topic: andro revolution QUAD
Posted By: mat123
Subject: andro revolution QUAD
Date Posted: 06/18/2006 at 8:47am
| does anyone play with one of the quad's ? And what do/don't you like about it ? |
Replies:
Posted By: gundam
Date Posted: 06/18/2006 at 6:59pm
|
I've used all of the QUADs, ie. 480,450,420. I'm a close-to-table looper and use the andro JM Saive blade. I'd prefer the 450 because it suits my style of play.
The rubbers are good but IMHO has only a short life, after playing with in for one season, the rubbers are nearly dead by the end of it, so you can imagine the degradation during the season. Since the rubber tends to go dead quicker, I did the unimaginable, I speed glued the rubber. They became alive again, but these rubbers do not like being speed glued. You'll notice the edges of the rubber start to chip away and in some instances some small rips start to happen in the middle. I used the QUAD 420 on my back-hand and find it too slow for blocking and pushes. It is however excellent for initiating attack, ie. doing safe loops. The QUAD 480 on the other hand is excellent for people who play a very agressive game. When hit properly, these rubbers do produce a loud 'popping' sound.  ------------- 
|
Posted By: CyrusTagle5215
Date Posted: 06/18/2006 at 11:45pm
|
i have tried this quad rubbers on 3 ply yasaka blade and its amazing. The first setup i have tried with the best control and soft feeling. Easy to loop and create topspin. Try this one! iTs good ... ------------- Stiga Offensive CR - Flared Handle FH - Bryce FX 2.1 Black BH - Sriver EL 2.1 Red Stiga Carbo Glue |
Posted By: PongPong
Date Posted: 06/19/2006 at 9:44pm
| Try Tibhar Rapid Direct Tech. It's soft yet fast. It produces a lot of sound, too. |
Posted By: mat123
Date Posted: 07/01/2006 at 8:23am
| gundam or someone else how did you stop the edges from clipping? |
Posted By: gundam
Date Posted: 07/01/2006 at 11:12am
|
you can't -- the rubbers just don't last that long
-------------
|